Spearit

 




 


 
 


Integrated Amplifiers
Creek Evolution 100A
Audiophile Integrated Amplifier

Price: $2,195.00 / each


  Options - Customize it
  choose a color - Silver or Black
 
  Warranty and considerations:
Warranty Terms (Parts and Labor) 2 years
Free Shipping to the Continental US? Yes

Creek Evo 100 Integrated Amplifier

To maintain a family resemblance with the lower powered amplifier, the EVOLUTION 100A is housed in a similar slim case with engraved front panel and solid metal control knobs as the EVOLUTION 50A. It is available with either a Black or Silver brushed aluminium front panel and uses the same ingenious soft push button design as the EVOLUTION 50 series, offering excellent tactile feel and backlit optical indication of functions, for optimum user-friendliness.

The front panel features a large OLED (Organic Light Emitting Diode) display, exactly matching the EVOLUTION 50 series. The white on black display provides higher clarity and resolution than a normal display and has a wide range of customised graphic symbols. Display brightness levels can be changed or turned-off, if not required, via the menu system.

In addition to greatly increased performance, thanks to ingenious new circuit design, the EVOLUTION 100A has been equipped with 2 sets of high quality loudspeaker binding posts, with local and remote switching for A & B outputs. Optional extras include the ability to plug the Sequel mk2 Phono pre-amp inside and add the AMBIT FM/AM radio or RUBY DAC/Bluetooth/FM radio module to the expansion slot on the rear panel.

At the heart of any high-end amplifier there must be a good power supply; The EVOLUTION 100A uses a massive 300 Watt, low profile, toroidal mains transformer, with multiple windings for high and low voltages and current, to separate the power amp, pre-amp and digital circuitry. Creek’s long-standing design policy of paralleling several small capacitors in the power supply creates an ultra-high specification capacitor, with low inductance and ultra low impedance. This significantly improves filtering and helps produce a very powerful and accurate sound from such a relatively small amplifier.

After testing several methods of building a high performance and high efficiency power amplifier, suitable for this new model, David Gamble ­­ – Creek Audio’s Senior Engineer – created a unique Class G circuit especially for the EVOLUTION 100A. David chose to use four Sanken STD03 complimentary power Darlington transistors per channel, as used in the EVOLUTION 50A, which feature built-in thermal compensation. Compared to the EVOLUTION 50A, he improved the performance of the voltage gain circuitry, which, in combination with the output stage, now achieves extremely high open-loop gain and exceptionally low distortion, without sacrificing stability. The result is an exceptional power amplifier circuit with very low output impedance and high output current capability. This combination provides exceptional speed and control suitable for driving most loudspeakers.

To increase the power output of the smaller EVOLUTION 50A, yet still retain the same case size, David Gamble developed a cunning Class G circuit which runs normally at a lower voltage for power levels up to 25 Watts into 8 Ohms. When required to produce more than 25 Watts, the amp automatically swings to a higher secondary voltage, to increase the output power capability to over 100 Watts into 8 Ohms.

Statistically, average audio signals are mostly below half the maximum voltage swing available, which incidentally is only one quarter of the power. As the dissipation of lossy ‘idle current’ in a Class A/B amp (in the form of heat) is much lower for a 25 Watt amp than the potential 100 Watts in the EVOLUTION 100A, this solution dramatically improves the amplifier’s thermal efficiency and helps to keep it slim and attractive.

Technical Specification

  • Power Output  >110 Watts into 8 Ohms
  • Power Output  >170 Watts into 4 Ohms
  • Continuous Current  >8.5 Amps (sine wave)
  • Max Current  +/- 26 Amps, current burst into 0.5 Ohms
  • Output Impedance  <0.05 Ohms – 20Hz to 20KHz
  • THD  < 0.002%
  • SNR  >102dB – Line Input
  • Frequency Response  10Hz – 100KHz +/- 2dB Line
  • Gain  33.3dB (x46) via power amp input
  • Input Sensitivity  410mV
  • Crosstalk  -80dB at 1Khz
  • DC Offest  < +/-10mV
  • Pre-amp Inputs  5x RCA unbalanced – 1x Balanced XLR
  • Power-amp Inputs  Input 3 & 4via RCA or XLR
  • Optional Tuner  AMBIT FM/AM plug-in module
  • Optional DAC  RUBY DAC – USB,SPDIF,Toslink, Bluetooth & FM Tuner
  • Outputs  2 Pairs
  • Headphone output  Dedicated low impedance amp (<50 Ohms)
  • IR Bus  Powered output for IR repeater
  • Operating Voltages  110V/230V Switchable
  • Consumption (at idle)  <20 Watts (no standby)
  • Consumption (at full power)  500 Watts
  • Weight  9Kgs
  • Dimensions  430x60x280mm W/H/D


.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Spearit Sound
351 Pleasant Street
Northampton, MA 01060
United States
Ph: 413-584-9547
Fax: 413-585-5139
e-mail: jtozzi@spearitsound.com
 

Join our Mailing List!
Enter your email address:
 
Click to view this Product
NAD Masters Series M32 Exhibit Stock
NAD Masters Series M32 Direct Digital DAC Integrated Amplif...

Your Price: $3,199.00 / Each
You Save:$800.00 / Each
Add to cart Enlarge
Click to view this Product
NAD D3020 Hybrid Digital Amplifier Refurbished
Reinventing an icon

Your Price: $329.00 / Each
You Save:$170.00 / Each
Add to cart Enlarge
Click to view this Product
NAD C 390DD Refurbished
Direct Digital Amplifier

Your Price: $1,299.00 / Each
You Save:$1,301.00 / Each
Add to cart Enlarge

Home     |    About Us     |    Products     |    Terms     |    Privacy     |    FAQ     |    Order Status     |    Contact Us
Copyright © Spearit Sound. All Rights Reserved.

Powered by Fortune3