Multi-Channel Power Amps
NAD CI 940
Four Channel Power Amplifier

Price: $799.00 / Each

  Warranty and considerations:
Warranty Terms (Parts and Labor) 3 years
Free Shipping to the Continental US? Yes

NAD CI 940 Four Channel Amplifier.

The CI 940 represents NAD’s newest generation of high performance amplification for custom installation and distributed audio systems. Like many award-winning NAD amplifi ers before it, the CI 940 is designed by our Engineer Emeritus, Bjørn Erik Edvardsen. The CI 940 can easily provide the instantaneous peak current required for good bass response by utilizing multiple discrete high power output devices. The power supply features a custom toroidal transformer that maintains very low impedance for lowest noise and good damping factor.

Power and Performance
The CI 940 has 4 channels of clean low distortion power set up in a 2 stereo zone confi guration. Boasting 35 watts of continuous power per channel, the CI 940 is designed to drive low impedance speakers and long wire runs. Vanishingly low distortion and near absence of noise allow the music to emerge from a ‘black’ background that enhances stereo perspective and allows the subtle details of the music to be heard clearly. Generous dynamic power gives music a relaxed yet lively quality.

Simplicity in Integration Easy integration is assured by the choice of DC trigger or signal-sensing auto-on with auto shut-off. The CI 940 employs a sophisticated music-sensing circuit to prevent the false triggers common with noisy source components or other types of interference noise like RF leakage or ground loops. Rack install is made neat and effi cient, since the inputs and triggers offer daisy chain outputs. The power cable is detachable for easy service or cable upgrade. The amplifi er is fully protected from short circuit and overheating and automatically restores operation after the condition is rectifi ed. Indicator LEDs for each zone show protection status.

No worries, No hassle
System reliability and ease of installation were the primary objectives in this all-new design. The 2U rack height and included rack ears make good use of precious rack space. Thermostatically controlled forced air cooling ensures a long trouble-free service life. Phoenix speaker connection blocks make installation a snap, and wiring further simplifi ed. A bridging feature allows each pair of channels to become a single high power channel, creating additional fl exibility.

Award-winning Sonics
When it comes to sound, NAD is in the top tier of all amplifier brands, consistently winning awards for both performance and value for money. Known for their warm, expansive and intensely musical sound, NAD amplifi ers are designed to drive real world speaker loads, not just simple laboratory test loads. The NAD CI 940 will bring out the best performance from any speaker giving you the best possible listening experience. It is also
very quiet with inaudible residual noise in no-signal conditions, important when using effi cient speakers in small spaces. Energy effi ciency is also impressive with <0.5W standby consumption and highly effi cient power delivery. Musical, practical, efficient and reliable, the CI 940 is everything you want for high quality distributed audio.

CI 940 Multi-Channel Amplifier
4 x 35W

  • Continuous Output Power 8 Ohms/4 Ohms: 4 x 35W (ref. rated THD, 20Hz-20kHz, all channels driven)
    8 Ohms in Bridge Mode: 2 x 70W
  • Rated THD (250mW to rated power, CCIF IMD, DIM 100): =0.03% (ref. 20Hz-20kHz)
  • IHF Dynamic Power 8 ohms: 55W
    4 ohms: 85W
    2 ohms: 95W
  • Damping Factor: >180 (ref. 8 ohms, 50Hz and 1kHz)
  • Input Sensitivity: 270mV (ref. rated power)
  • Voltage Gain: 35dB
  • Frequency Response: ±0.2dB (ref. 20Hz-20kHz), -3dB at 3Hz and 100kHz
  • Signal/Noise Ratio, A-Weighted: >95dBA (ref. 1W), >110dB (ref. 35W)
  • Trigger: 5-30V In (AC/DC), -52dBV, 12V Out
  • Time to Automatic Standby (without signal at input sense mode): <10 minutes


  • Rated Power: 270W (120V 60Hz, 230V 50Hz)
  • Idle Power: <55W
  • Standby power: <0.5W
  • Unit Dimension (WxHxD) - Gross (includes knobs, terminals and mounting brackets): 19 x 3 1/2 x 12 3/4”
  • Net weight 16.9lb


.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  
Spearit Sound
351 Pleasant Street
Northampton, MA 01060
United States
Ph: 413-584-9547
Fax: 413-585-5139
e-mail: jtozzi@spearitsound.com

Join our Mailing List!
Enter your email address:
Click to view this Product
NAD Masters Series M27 Refurbished
Masters Series Seven Channel Power Amp

Your Price: $2,950.00 / Each
You Save:$1,049.00 / Each
Add to cart Enlarge
Click to view this Product
NAD Masters Series M25 Refurbished
Masters Series Seven Channel Power Amp

Your Price: $2,150.00 / Each
You Save:$1,349.00 / Each
Add to cart Enlarge
Click to view this Product
NAD T 977
NAD Seven Channel Power Amplifer

Your Price: $1,999.00 / Each
You Save:$800.00 / Each
Add to cart Enlarge

Home     |    About Us     |    Products     |    Terms     |    Privacy     |    FAQ     |    Order Status     |    Contact Us
Copyright © Spearit Sound. All Rights Reserved.

Powered by Fortune3