|| Warranty and considerations:
|Warranty Terms (Parts and Labor)
|Free Shipping to the Continental US?
conrad johnson ET3 with Phono Stereo Preamplifier
At conrad-johnson, development of our flagship products has traditionally led to important enhancements of our entry-level offerings. The ET3 preamplifier is a case in point. The ET3 line-stage is a "baby" version of our flagship line-stage preamplifier, the GAT. The family resemblance is much more than skin deep. With voltage gain provided by a triode vacuum-tube, the zero-feedback line-stage circuit of the ET3, along with its DC voltage regulators, closely replicates the circuit of the GAT. Finally, and especially noteworthy, the ET3 features a relay operated discrete stepped attenuator level-control circuit of the type found in the GAT and CT5, absent only the balance control function found in those more costly models.
Functionally, the ET3 provides highly flexible I/O facilities with six separate line-level inputs (including one "tape" loop), plus a theater loop that facilitates use in a home theater system. In addition, the ET3 offers the convenience of infrared remote control of all functions.
For vinyl enthusiasts, the ET3 is optionally available with a vacuum-tube phono stage that borrows its zero-feedback audio circuit from our reference quality TEA1 phono stage. Customers can choose between high gain (recommended for cartridges with a rated output of 1.0 mV or less) and low gain (recommended for cartridges with rated output greater than 1.0 mV) versions of the phono stage. Input resistive loading is switch selectable over a range from 47 kOhms down to 200 Ohms. The ET3 phono stage is built to the same high quality standard found in the ET3 line-stage
It would be fair to say that the only thing “entry-level” about the ET3 is its price. Arrange to audition one at a conrad-johnson dealer to find out for yourself - you'll be surprised at just how affordable true high-end performance can be.
- ET3 line stage
- Gain: 25 dB
- Maximum Output: 20 Vrms
- Distortion: less than .15% THD
- Impedance: 100 Ohms
- Freq. Response: 2 Hz to more than 100 KHz
- Hum and Noise: 98 dB below 2.5 V
- Phase: phase inverting
- Tube Compliment: 1x 6922
- Dimensions: 13.125D x 19W x 3.315H inches
Weight: 13 lbs.
ET3 Optional Phono Stage
- Gain: High Gain Version 54dB
Low Gain Version 40dB
- RIAA Equalization: +/- .25 db 20Hz to 20kHz
- Hum and Noise: -80dB relative to 10mV input
- Phase: phase correct
- Tube Compliment: High Gain Version 3x 12AX7; Low Gain Version 2x 12AX7, 1x 12AU7 (use high gain with cartridges with less than 1mV output.)
Every conrad-johnson ET3 Preamplifier is patiently and carefully hand assembled, then individually inspected and its performance verified by an experienced audio technician. The owner is protected by our three year limited warranty covering labor and parts except vacuum-tubes. Service is a top priority at conrad-johnson. In the event that a product does require service, it will be handled promptly and efficiently.