Stereo Power Amplifier: Input 1.2 V driving 60 watts, maximum 85 watts
output.
Multiple Inputs: RCA and XLR inputs.
Custom Wound Audio Transformers with a core of German grain oriented
silicon steel. 15th generation proprietary design. Secondary can be
configured for a 4 ohm or 8 ohm load.
Top panel bias testing terminal with bias adjustment controls plus
EZ-biasing.
State of the Art Components: Hexfred Diodes, ceramic composite grid
resistors, custom coupling caps.
Low Feedback Design: Only 5 dB
Technical Specifications: Maximum Power Output: 85 W per channel at
8 ohms, 1KHz Rated Output Power: 60 W per channel at 8 ohms, 22Hz
to 60KHz Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz +
1dB Bandwidth: 15Hz to 80KHz + 3dB; 0dB 60 W 1KHz Distortion THD:
Less than 1% at 20 V output, 28Hz to 15KHz Circuit Type: Ultra
Linear, Class AB Input Impedance: 100Kohms Input Sensitivity:
1.2 V at 1KHz for 60 watt output Output Impedance: 4 ohms and 8
ohms Negative Feedback: Less than 5 dB Noise and Hum: 85dB
below rated output Tube Complement: 2 matched pairs (4) of 6550/KT88
power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power
drivers Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450
watts maximum (220 VAC 50Hz option) Dimensions: 17 inches (43cm) wide
by 15 inches (38cm) deep by 7.5 inches (19 cm) high Weight: 50 pounds
(18 Kg) net, approximately 55 pounds (21 Kg) packaged Warranty: Two
year limited parts and labor. One year or 3000 hours whichever comes first on
Jolida Tubes. Bias Settings: 500 millivolts + 50 mV Fuse: 110
- 120 VAC, 6.3 Amp Fast Blo;
